The iBox is the heart of the iEFIS system, and the conductor in the symphony of communication between all system devices and the iEFIS screens. The iBox contains the GPS engine (with antenna connection), the pitot/static sensors and Angle of Attack sensors. The iBox is the hub of communication for all the system devices (AHRS, RDAC, Autopilot Servos) and is also the hub of communication with all third party devices (radios, transponders, ADS-B, VP-X) via its RS-232 and ARINC interfaces.

One iBox is necessary in every iEFIS system, and in cases where maximum redundancy is required, a 2nd iBox can be added to the system. The 2nd iBox acts as a ‘hot standby’ and is ready to take over all iBox tasks automatically when necessary, or on command by the pilot.

Click on the DB-25 connectors above to see more information on those connectors.

The Power Connector (pigtail harness included with every iBox):
The iBox can be powered by 1 or 2 Power Sources (as in the case of a backup battery system). It also has a Keep Alive Power input that maintains date and time and some non-volatile memory items without using the CR2032 battery, which can result in up to 10 years of life on the CR2032 eliminating the need to change this battery every year. The Outside Air Temp sensor also connects to the Power connector.

The CAN Connector (pigtail harness included with every iBox):
The iBox features 2 CAN buses (CAN 1 and CAN 2). The system devices can be split up in any way on each of the CAN buses.

OAT Probe
Our aluminum OAT probe is included with every iBox

GPS Antenna
Our tuned GPS Antenna is included with every iBox (inside mount)

EFIS LAN coax
An RG-174 EFIS LAN coax cable is included with each system

Click to enlarge

Previous product

UMA Tach Sender for Lycoming-Continental $140.30

Back to products

Next product

SP-10 $299.00

Magnetic Current Sensor for EFIS

Name: Magnetic Current Sensor for EFIS
SKU: MAG-CURRENT
Price: 55.00 USD
Availability: InStock

$55.00

DISCONTINUED – Use MAG-CURRENT-LOOP instead!

In stock

Compare

Add to wishlist

SKU: MAG-CURRENT Category: EMS

Description

This sensor can be used to measure DC currents in aircraft power systems in a wide range from less than 4A to as high as 120A depending on installation and configuration. The sensor connects to an EFIS system via spare RDAC inputs. Inputs CHT1,CHT2,oil pressure or oil temperature can be used and these can also be used on a second RDAC unit (consider a low cost RDAC VD as second RDAC if required). G1 and G2 EFIS systems can support up to 4 of these sensors while Enigma can support 2. These sensors can measure currents bi-directional, for example battery charge/discharge. The major advantage of these sensors is that they can be fitted to existing conductors very easily without a need to break the conductor or require the use current shunts.

Additional information