The iBox is the heart of the iEFIS system, and the conductor in the symphony of communication between all system devices and the iEFIS screens. The iBox contains the GPS engine (with antenna connection), the pitot/static sensors and Angle of Attack sensors. The iBox is the hub of communication for all the system devices (AHRS, RDAC, Autopilot Servos) and is also the hub of communication with all third party devices (radios, transponders, ADS-B, VP-X) via its RS-232 and ARINC interfaces.

One iBox is necessary in every iEFIS system, and in cases where maximum redundancy is required, a 2nd iBox can be added to the system. The 2nd iBox acts as a ‘hot standby’ and is ready to take over all iBox tasks automatically when necessary, or on command by the pilot.

Click on the DB-25 connectors above to see more information on those connectors.

The Power Connector (pigtail harness included with every iBox):
The iBox can be powered by 1 or 2 Power Sources (as in the case of a backup battery system). It also has a Keep Alive Power input that maintains date and time and some non-volatile memory items without using the CR2032 battery, which can result in up to 10 years of life on the CR2032 eliminating the need to change this battery every year. The Outside Air Temp sensor also connects to the Power connector.

The CAN Connector (pigtail harness included with every iBox):
The iBox features 2 CAN buses (CAN 1 and CAN 2). The system devices can be split up in any way on each of the CAN buses.

OAT Probe
Our aluminum OAT probe is included with every iBox

GPS Antenna
Our tuned GPS Antenna is included with every iBox (inside mount)

EFIS LAN coax
An RG-174 EFIS LAN coax cable is included with each system

Click to enlarge

Previous product

V16 COM Radio Harnesses $249.00 – $349.00

Back to products

Next product

V6 COM Radio Harnesses $219.00 – $299.00

N16 NAV Radio Harnesses

Name: N16 NAV Radio Harnesses
SKU: H-N16
Availability: InStock

$149.00 – $299.00

Compare

Add to wishlist

SKU: H-N16 Category: Harnesses

Description

Simplify the wiring and installation of your N16 NAV Radio with our available pre-made harnesses. Our harnesses are feature-complete and tested to ensure they are ready for installation in your aircraft.

N16 Radio harnesses are offered in several variants depending on installation type.

These variants are:

H-N16-RAZOR – N16 Harness with Razor Harness for standalone installation
H-N16-ONLY – N16 Harness for integration with V16 via CAN bus
H-N16-A16 – N16 Harness for integration with V16 via CAN bus and A16 Audio Panel through QuickConnect

All N16 harnesses offer:

CAN Bus for use with V16 and/or Razor/Vega VHF Control
RS-232 for MGL EFIS CDI and control
Aux audio out for connection to V16 or audio panel
Aux audio in – useful for EFIS aural alert audio when using V16’s audio input for NAV audio

Standard lengths not enough?

Custom-sized harnesses are available to be made to your specifications. Contact us for a quote.

Additional information

Brand	Midwest Panel Builders
Standard Harness Lengths:	Audio: 2ft CAN: 2ft RS-232: 4ft Power/Ground: 4ft NOTE: Not Applicable to A16-compatible or aircraft-specific harnesses