The iBox is the heart of the iEFIS system, and the conductor in the symphony of communication between all system devices and the iEFIS screens. The iBox contains the GPS engine (with antenna connection), the pitot/static sensors and Angle of Attack sensors. The iBox is the hub of communication for all the system devices (AHRS, RDAC, Autopilot Servos) and is also the hub of communication with all third party devices (radios, transponders, ADS-B, VP-X) via its RS-232 and ARINC interfaces.

One iBox is necessary in every iEFIS system, and in cases where maximum redundancy is required, a 2nd iBox can be added to the system. The 2nd iBox acts as a ‘hot standby’ and is ready to take over all iBox tasks automatically when necessary, or on command by the pilot.

Click on the DB-25 connectors above to see more information on those connectors.

The Power Connector (pigtail harness included with every iBox):
The iBox can be powered by 1 or 2 Power Sources (as in the case of a backup battery system). It also has a Keep Alive Power input that maintains date and time and some non-volatile memory items without using the CR2032 battery, which can result in up to 10 years of life on the CR2032 eliminating the need to change this battery every year. The Outside Air Temp sensor also connects to the Power connector.

The CAN Connector (pigtail harness included with every iBox):
The iBox features 2 CAN buses (CAN 1 and CAN 2). The system devices can be split up in any way on each of the CAN buses.

OAT Probe
Our aluminum OAT probe is included with every iBox

GPS Antenna
Our tuned GPS Antenna is included with every iBox (inside mount)

EFIS LAN coax
An RG-174 EFIS LAN coax cable is included with each system

Click to enlarge

Previous product

Sandia STX 165R Harness $65.00

Back to products

Next product

MGL Razor/Vega VHF Harness $159.00

MGL SP-12 Harness

Name: MGL SP-12 Harness
SKU: H-SP12
Price: 95.00 USD
Availability: InStock

$95.00

In stock (can be backordered)

Compare

Add to wishlist

SKU: H-SP12 Category: Harnesses

Description

Easy and cost-effective ADS-B Installation comes standard with the MGL SP-12 TABS GPS Harness.

The SP-12 harness offer a quick way to get the SP-12 GPS onto the MGL CAN bus and integrated with the Trig TT22 for FAA 2020 ADS-B Out compliance.

Harness can also be custom-ordered with RS-232 support for third-party devices compatible with NMEA TABS GPS protocol

All harnesses are tested and ship with a diagram.

NOTE: If installing the SP-12 and using the Trig TT22, be sure to connect both devices to the same CAN bus. Failure to do so will result in ADS-B position integrity failures!