The iBox is the heart of the iEFIS system, and the conductor in the symphony of communication between all system devices and the iEFIS screens. The iBox contains the GPS engine (with antenna connection), the pitot/static sensors and Angle of Attack sensors. The iBox is the hub of communication for all the system devices (AHRS, RDAC, Autopilot Servos) and is also the hub of communication with all third party devices (radios, transponders, ADS-B, VP-X) via its RS-232 and ARINC interfaces.

One iBox is necessary in every iEFIS system, and in cases where maximum redundancy is required, a 2nd iBox can be added to the system. The 2nd iBox acts as a ‘hot standby’ and is ready to take over all iBox tasks automatically when necessary, or on command by the pilot.

Click on the DB-25 connectors above to see more information on those connectors.

The Power Connector (pigtail harness included with every iBox):
The iBox can be powered by 1 or 2 Power Sources (as in the case of a backup battery system). It also has a Keep Alive Power input that maintains date and time and some non-volatile memory items without using the CR2032 battery, which can result in up to 10 years of life on the CR2032 eliminating the need to change this battery every year. The Outside Air Temp sensor also connects to the Power connector.

The CAN Connector (pigtail harness included with every iBox):
The iBox features 2 CAN buses (CAN 1 and CAN 2). The system devices can be split up in any way on each of the CAN buses.

OAT Probe
Our aluminum OAT probe is included with every iBox

GPS Antenna
Our tuned GPS Antenna is included with every iBox (inside mount)

EFIS LAN coax
An RG-174 EFIS LAN coax cable is included with each system

View cart “iEFIS MX1” has been added to your cart.

Click to enlarge

Previous product

6 Gang Power Distribution Block - Michigan Avionics

Circuit Breaker Block $59.99

Back to products

Next product

Lycoming 6 cyl Sensor Kit - Michigan Avionics

Lycoming - Continental 6cyl Sensor Pack From: $1,109.43

iEFIS System Builder

Name: iEFIS System Builder
SKU: 1679
Availability: InStock

Compare

Add to wishlist

Category: EFIS

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “iEFIS System Builder”

You must be logged in to post a review.

iEFIS Manuals

iEFIS Installation Manual 1 file(s) 3.34 MB Download	iEFIS User Manual 1 file(s) 1.94 MB Download	iEFIS Getting Started 1 file(s) 51.60 KB Download
iEFIS Navigation Manual 1 file(s) 3.01 MB Download	iEFIS GPS Manual 1 file(s) 154.58 KB Download	iEFIS Altimeter Calibration 1 file(s) 301.02 KB Download
iEFIS Autopilot Manual 1 file(s) 827.73 KB Download	iEFIS design specifications 1 file(s) 51.03 KB Download	IEFIS G3 Inputs, Outputs and Alarms 1 file(s) 640.85 KB Download
iEFIS Menus 1 file(s) 4.25 MB Download	iEFIS Plates 1 file(s) 1.30 MB Download	iEFIS Pocket FMS Plates 1 file(s) 1.27 MB Download
IEFIS G3 Inputs, Outputs and Alarms 1 file(s) 640.85 KB Download	MGL EFIS recording tool 1 file(s) 855.30 KB Download	iEFIS Screen Alteration Manual 1 file(s) 2.60 MB Download
Introduction to the iEFIS Explorer 1 file(s) 717.34 KB Download